[Course Forum] Architecture/Design Terms by Timrsk

This is the course forum for the following course.

Please post any questions or suggestions that you have here :slight_smile:

1 Like

@Lien, would you mind inviting timrsk, the creator of this course, to the forums?

1 Like

Sure, I’ve pinged him an email. Hopefully we’ll hear back soon but if not, please let me know so I can add you as a contributor (if you’re interested)

1 Like

@Lien, Okay, thanks! :slight_smile:

Hi all,

I don’t really use memrise anymore, but you are set to be able to make changes to this course right?

I’d say feel free to add/edit as you please. I know if I were still using it Id probably try and change it to not have the pinyin/character separation anymore, as that’s kind of a holdover from old courses / very basic Chinese courses.


Thanks for your kind reply @timrsk, it’s much appreciated!

@neoncube, would you like to be added as a contributor?

@timrsk, okay, thanks. Yes, I’m a contributor, so I’m able to make changes.

Hope things are going well for you :slight_smile:

@Lien, I’m already a contributor, but thanks :slight_smile:

1 Like

To anyone who’s interested: I’ve made a companion to this course that tests on English->Chinese instead of Chinese->English and Chinese->Pinyin, like this course does. I find that sometimes when someone says a word in Chinese, I can understand it after thinking for a time, but sometimes when I need to translate an English word into Chinese, and I can’t think of the correct Chinese word. This companion course tries to address that issue.

Anyway, if you’re interested, please check it out here :slight_smile:

1 Like

I’ve changed the characters for “isometric view” from 轴侧图 to 轴测图。I’m not sure that this is correct, so if anyone has experience with one or both of these terms, please let me know :slight_smile: